Exhaust Phantom LS- Tomos A3 / A35 / Colibri

Description

Phantom LS exhaust – Tomos A3 / A35 / Colibri
You could say that the Phantom LS is the middle brother between the RS and WIND models.
Phantom LS exhausts are mainly made for mopeds with cylinder kits (Aluminium – 50cc Airsal / DMP / Maxwell), but the maximum power will be achieved with cylinder kits 65 and 70cc (Airsal / DMP/ Alukit).Of course, we must not forget that this model has the only muffler screwed to the exhaust frame, which means that it can be replaced with another whenever we want.
The exhaust is made by hand and is only available in small series. The stock is limited, there will be no new deliveries

If you want an exhaust that not everyone has, this is the right exhaust for you

When using all exhausts, black painted, chrome and white exhausts, heat build-up on the exhaust manifold can cause the following:
With black outputs, the color may dissolve a little.Chrome and white exhaust manifolds can be discoloredIf the nozzle is too small or if the ignition is improperly adjusted, the exhaust port will get very hot, and discoloration and dissolution of the paint on the exhaust manifold will occur faster than with a perfectly tuned engine. We do not guarantee for discoloration or disintegration of the paint on the exhaust manifold!