Rear Brake Cable – Aprilia SR Motard / Piaggio Typhoon II 50–125cc 2010–2025

Description

Replacement rear brake cable is intended for various Aprilia SR Motard and Piaggio Typhoon II 50–125cc scooter models, including both two-stroke (2T) and four-stroke (4T) versions.

The rear brake cable provides mechanical force transmission from the brake lever to the rear brake mechanism and is an important component of the scooter’s braking system.

It is suitable for replacing a damaged, worn or rusted original cable, which may cause difficult rear brake operation, sticking or uneven operation of the braking mechanism.

Technical specifications

• Type: rear brake cable

• Version: replacement part based on the original design

• Installation position: rear brake

• Purpose: mechanical force transmission from the brake lever to the rear brake

• Suitable for: 2T and 4T versions

• Engine displacement: 50–125cc

OEM number

– Piaggio / Aprilia 666930

Suitable for

Aprilia SR Motard 50cc

• Aprilia SR 50 Motard 2T AC Euro 3 – 2012–2017

• Aprilia SR 50 Motard 2T AC Euro 4 – 2018–2020

• Aprilia SR 50 Motard 4T 4V AC Euro 2 – 2013–2021

Aprilia SR Motard 125cc

– Aprilia SR 125 Motard 4T AC Euro 3 – 2012–2014

Piaggio Typhoon II 50cc

• Piaggio Typhoon II 50 2T AC Euro 2 – 2010–2017

• Piaggio Typhoon II 50 2T AC Euro 4 – 2018–2020

• Piaggio Typhoon II 50 4T 4V AC Euro 2 – 2012–2025

Piaggio Typhoon II 125cc

– Piaggio Typhoon II 125 4T 2V AC Euro 3 – 2010–2019

Note

Before ordering, we recommend checking OEM number 666930 and comparing the cable length, connections and mounting points with the original part.

Different brake cables may be used depending on the model year and version of Aprilia SR Motard and Piaggio Typhoon scooters, so the model and engine displacement alone are not always sufficient to confirm compatibility.

Important: After installation, the cable tension must be adjusted correctly and the operation of the rear brake checked. The brake lever must return normally to its original position after release, and the rear wheel must rotate freely when the brake is released.

When replacing the cable, we also recommend inspecting the brake shoes or drum brake linings, return springs and braking mechanism.