Main jet set Polini M6 100–118 – Dellorto carburettors

Quality Polini M6 main jet set is intended for adjusting Dellorto carburettors. Jets with an M6 thread are generally used on carburettors sized 17.5 mm and larger.

The set contains different main jet sizes from 100 to 118, making it suitable for precise adjustment of the fuel quantity according to the engine configuration, cylinder, exhaust, air filter and other modifications.

Technical specifications

• Manufacturer: Polini
• Type: main jet set
• Thread: M6
• Jet sizes: 100–118
• Suitable for Dellorto carburettors
• Generally for carburettors 17.5 mm and larger
• For adjusting the fuel mixture
• Suitable for standard and tuning configurations

Sizes in the kit

The set contains main jets in the range:

100–118

Note

Before ordering, check whether your carburettor uses main jets with an M6 thread. When adjusting the carburettor, it is recommended to start with a larger or richer jet and then gradually reduce the size until the engine is correctly tuned.